PRODUCTS
FITTINGS
We design and manufacture the necessary accessories to carry out hot tapping or line stopping operations in all types of pipelines. All fittings are stamped with a code number for material identification. Material certificates are included. The quality control is according to the client’s specifications. Radiography Testing, Ultra Sonic Test, Magnetic Particle Examination, Hydrostatic Testing, Physical Testing are available.
Without Mechanized Flange Hot-Tap Fittings
The HOT-TAP FITTINGS are full branch split tees designed for equipment tie-ins, lateral connections and line extensions with permanent full bore valve. The HOT-TAP FITTINGS are equipped with a welding neck flange RF according to ANSI Class 150, 300, 600 or 900. They are available up to 48”. Larger sizes and pressure ratings are available by request.
Threaded Plug Linestop Fittings (Distribution)
The THREADED FITTINGS are designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations. They are also used for purge & equalization operations. The flat bottom THREADED FITTING includes a threaded internal plug, an O-ring, a threaded external cap and a flat bottom nipple. They are available in sizes 1-1/4”, 1-1/2”, 2”, 3” and in Class 150, 300. According to the size of the main pipeline, the THREADED FITTING needs an additional reinforcement like a: Weldolet or Pad. The reinforcement is according to the client’s specifications. If the THREADED FITTING has the same size than the main pipeline (size-on-size), the THREADED FITTING needs a full encirclement reinforcement. In case there is no reinforcement needed, TECPESA also manufactures this fitting with a scarfed or flat bottom ending.
Completion Plug Linestop Fittings
The COMPLETION PLUG FITTINGS are designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations all without shutdown. They are used also for gas bag installations. The COMPLETION FITTINGS are furnished with a blind flange with studs, nuts, gasket, an internal completion plug with an O-ring and a flat bottom flanged nipple. They are available in sizes 4”, 6”, 8”, 10”, 12” and in Class 150 and 300. With a flange class 150, the maximum operating pressure is 19 bar. With a flange class 300, the maximum operating pressure is 51 bar. According to the size of the main pipeline, the completion plug fitting needs an additional reinforcement like a: Weldolet or Pad. If the completion fitting has the same size than the main pipeline (size-on-size), needs a full encirclement reinforcement. The reinforcement is according to the client’s specification. In case there is no reinforcement needed, TECPESA also manufactures this fitting with a scarfed or flat bottom ending. The COMPLETION PLUG FITTINGS are also available with a reducing branch to be used as bypass fittings or to connect different pipeline sizes.
Threaded Plug 3 Way Tee Fittings
The THREADED 3 WAY TEE fittings are designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations, all without shutdown. The THREADED 3 WAY TEE fitting includes a threaded internal plug with O-ring, an external cap and a flat bottom nipple. They are available in sizes 1-1/4”, 1-1/2”, 2”, 3” and in Class 150, 300. They allow to plug in different directions. According to the size of the main pipe, the THREADED 3 WAY TEE fittings need an additional reinforcement like a: Weldolet or Pad. The reinforcement is according to the client’s specifications. If the THREADED 3 WAY TEE fitting has the same size than the main pipeline (size-on-size), the threaded 3 way fitting needs a full encirclement reinforcement (right). In case there is no reinforcement needed, TECPESA also manufactures this fitting with a scarfed or flat bottom ending.
Completion Plug 3 way tee fittings
The COMPLETION PLUG 3 WAY TEE fittings are designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations, all without shutdown. The COMPLETION PLUG 3 WAY TEE fittings are furnished with a blind flange with studs, nuts and gasket, an internal completion plug with O-ring and a flat bottom flanged nipple. They are available in sizes 4”, 6”, 8”, 10”, 12” Class 150 and Class 300. With a flange Class 150, the maximum operating pressure is 19 bar. With a flange class 300, the maximum operating pressure is 51 bar. They allow to plug in different directions. According to the size of the main pipe, the COMPLETION PLUG 3 WAY TEE fittings need an additional reinforcement like a: Weldolet or Pad. The reinforcement is according to the client’s specifications. When the COMPLETION PLUG 3 WAY TEE fitting has the same size than the main pipeline (size-on-size), the completion 3 way tee fitting needs a full encirclement reinforcement. In case there is no reinforcement needed, TECPESA also manufactures this fitting with a scarfed or flat bottom ending. The COMPLETION PLUG 3 WAY TEES are also available with a reducing branch to be used as bypass fittings or to connect different pipeline sizes.
Threaded & Completion Plug Spherical 3 Way Tee
The THREADED & COMPLETION SPHERICAL 3 WAY TEES are designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations; all without shut down the line. The 2″-3″ THREADED SPHERICAL 3 WAY TEE is furnished with a threaded nipple, a threaded internal plug with O-ring and an external threaded cap, all welded to a full branch sphere. It is available in Class 150 and 300. The COMPLETION SPHERICAL 3 WAY TEE is furnished with a grooved flange to engage the leaves of standard completion plug, a blind flange with bolts, nuts and gasket, an internal completion plug with Oring – all welded to a full branch sphere. It is available in sizes 4″, 6″, 8″, 10″, 12″ and in class 150 and 300. With a flange Class 150, the maximum operating pressure is 19 bar. With a flange Class 300, the maximum operating pressure is 51 bars. The bottom half of the SPHERICAL 3 WAY TEE can be turned to a side or a bottom outlet. The tee can also be installed horizontally.
Autoblock Plug Linestop Fittings
The AUTOBLOCK PLUG FITTINGS are full branch split tees designed for main relocations, equipment tie-ins, linestop operations all without shutdown. They are also used for gas bag installations. The AUTOBLOCK PLUG FITTING is furnished with a drilled and faced autoblock flange, a blind flange with studs, nuts and gaskets, an internal high pressure plug (autoblock plug) with O-ring. They are available in sizes from 4” to 48” Class 300, Class 600 and Class 900. According to size of the main pipeline and the client’s specifications, the linestop fitting can be manufactured with a different reinforcement like: a Weldolet or Pad. If the AUTOBLOCK PLUG FITTING has the same size than the main pipeline (size-on-size), the autoblock fitting needs a full encirclement reinforcement. In case there is no reinforcement needed, TECPESA also manufactures this fitting with a scarfed or flat bottom ending. The AUTOBLOCK FITTINGS are also available with a reducing branch to be used as bypass fittings or to connect different pipeline sizes.
Autoblock Plug 3 Way Tee Fittings
The AUTOBLOCK PLUG 3 WAY TEES fittings are full branch 3 way tees designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations, all without shutdown. The AUTOBLOCK 3 WAY TEE fittings are furnished with a drilled and faced autoblock flange, a blind flange with studs, nuts and gaskets, an internal high pressure plug (autoblock plug) with O-ring and a tee. They are available in sizes from 4” to larger sizes, Class 300, 600 and 900. According to the size of the main pipe and the client’s specifications, the AUTOBLOCK PLUG 3 WAY TEE fittings can be manufactured with different reinforcements like a: Weldolet or Pad. In case there is no reinforcement needed, TECPESA also manufactures this fitting with a scarfed or flat bottom ending. The AUTOBLOCK PLUG 3 WAY TEES are also available with a reducing branch to be used as bypass fittings or to connect different pipeline sizes.
Threaded Plug Linestop Fittings (Transmission)
The THREADED FITTINGS are designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations. They are also used for purge & equalization operations. The flat bottom THREADED FITTING includes a threaded internal plug, an O-ring, a threaded external cap and a flat bottom nipple. They are available in sizes 1-1/4”, 1-1/2”, 2”, 3” and in Class 600, 900. According to the size of the main pipeline, the THREADED FITTING needs an additional reinforcement like a: Weldolet or Pad. The reinforcement is according to the client’s specifications.
If the THREADED FITTING has the same size than the main pipeline (size-on-size), the THREADED FITTING needs a full encirclement reinforcement. In case there is no reinforcement needed, TECPESA also manufactures this fitting with a scarfed or flat bottom ending.
Threaded Plug 3 Way Tee Fittings (Transmission)
The THREADED 3 WAY TEE fittings are designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations, all without shutdown. The THREADED 3 WAY TEE fitting includes a threaded internal plug with O-ring, an external cap and a flat bottom nipple. They are available in sizes 1-1/4”, 1-1/2”, 2”, 3” and in Class 600, 900. They allow to plug in different directions. According to the size of the main pipe, the THREADED 3 WAY TEE fittings need an additional reinforcement like a: Weldolet or Pad. The reinforcement is according to the client’s specifications. If the THREADED 3 WAY TEE fitting has the same size than the main pipeline (size-on-size), the threaded 3 way fitting needs a full encirclement reinforcement (right). In case there is no reinforcement needed, TECPESA also manufactures this fitting with a scarfed or flat bottom ending.
Autoblock Plug Spherical 3 Way Tee
The AUTOBLOCK PLUG SPHERICAL 3 WAY TEES are designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations; all without shutdown the line. The AUTOBLOCK PLUG SPHERICAL 3 WAY TEE is furnished with a drilled and faced autoblock flange, blind flange with bolts, nuts and gasket, an internal autoblock plug (high pressure plug) with O-ring, all welded to a full branch sphere. It is available in sizes from 4” in Class 300, 600 and 900. In any case, the maximum installation pressure is the maximum operating pressure of the Equipment. The bottom half of the SPHERICAL 3 WAY TEE can be turned to a side or a bottom outlet. The tee can also be installed horizontally.
The FITTINGS SPEC. “MARCHÉ” FRANCE are special fittings designed and approved for the French Market. They are THREADED FITTINGS and COMPLETION PLUG FITTINGS – COMPLETION PLUG, 3 WAY TEE COMPLETION PLUG, SPHERICAL 3 WAY TEE COMPLETION PLUG- All of them are designed for main relocations, lateral connections, line extensions, equipment tie-ins, linestop operations, and some for purge & equalization operations. They are available in sizes up to 12” and pressure up to 25 bar.